Product in development
Configure for your equipment.
Not the other way around.
Every motor is different. Every pump is different. CauseNex sensor probes are modular — buy the starter package for your equipment type, then add nodes wherever your installation requires them. All components connect to the same cloud platform and the same dashboard.
All configurations are in the prototyping phase.
Application Packages
Start with the configuration designed for your equipment type. Add components where your installation requires them.
Standard Motor
For general-purpose electric motors under €15K
Includes
- 1× CN-V1Core Node
- 1× CN-C1Current Clamp
Single-point monitoring for general-purpose motors. Covers drive-end bearing vibration, temperature, and motor current signature. Suitable for non-critical motors and standard manufacturing applications.
Recommended when motor failure allows time for planned response without immediate production stoppage.
Critical Motor
For high-value motors €15K–50K
Includes
- 2× CN-V1Core Node
- 1× CN-C1Current Clamp
Dual-point monitoring for high-value motors. One node on the drive-end bearing, one on the non-drive-end bearing. The current clamp is shared across both nodes. Catches faults that develop on either bearing end independently.
Recommended for motors driving critical production lines where unplanned failure stops output.
High-Value Asset
For motors over €50K or motor-gearbox assemblies
Includes
- 3× CN-V1Core Node
- 1× CN-C1Current Clamp
Three-point monitoring for high-value motors and motor-gearbox assemblies. Covers drive-end bearing, non-drive-end bearing, and gearbox output shaft or coupling point. Designed for assets where unplanned failure exceeds €30K in combined repair and downtime cost.
Recommended for assets with no standby unit, long lead times on replacement parts, or where failure affects multiple downstream processes.
Pump or Compressor
For general pumps, compressors and fluid systems
Includes
- 2× CN-V1Core Node
- 1× CN-C1Current Clamp
- 1× CN-P1Pressure Probe
Standard fluid-equipment configuration. One node on the motor bearing, one on the pump or compressor bearing. Current clamp on the motor power cable. Pressure probe on the process line. Together these cover bearing wear, motor anomalies, and process pressure deviation.
Recommended for water treatment, HVAC, general industrial pumping and air compression systems.
Critical Pump
For high-consequence pumps where cavitation detection is essential
Includes
- 1× CN-V1Core Node
- 1× CN-V2Core Node Pro
- 1× CN-C1Current Clamp
- 1× CN-P1Pressure Probe
Extended pump configuration with high-frequency acoustic sensing on the pump end. Designed for applications where cavitation can damage impellers rapidly or contaminate product — chemical processing, food and beverage, pharmaceutical fluid handling, and critical cooling loops.
The CN-V2 Core Node Pro is positioned on the pump housing. The CN-V1 Core Node is positioned on the motor bearing.
CNC Spindle
For CNC machining centers and precision spindles
Includes
- 1× CN-V2Core Node Pro
Single high-frequency acoustic-enabled node for CNC spindle monitoring. Spindle bearing fault frequencies at high RPM require acoustic emission sensing that standard vibration analysis cannot capture at those frequencies. Variable frequency drive systems on CNC machines make current monitoring less informative for spindle-specific faults.
Recommended for machining centers, turning centers, grinding machines, and high-speed spindle units.
CNC with Power Monitoring
For CNC machines where spindle load and tool wear tracking are needed
Includes
- 1× CN-V2Core Node Pro
- 1× CN-C1Current Clamp
CNC configuration with current monitoring added for spindle load tracking and tool wear correlation. Recommended for production shops running long unattended machining cycles where tool wear progression affects part quality before causing spindle failure.
Current monitoring on CNC machines tracks motor load variation — useful for tool wear trending even when not useful for direct fault detection.
Not sure which package?
Match your equipment to the right starting configuration.
General electric motor
Asset value: Under €15K
M1 — Standard Motor
Critical production motor
Asset value: €15K – €50K
M2 — Critical Motor
High-value motor or motor-gearbox
Asset value: Over €50K
M3 — High-Value Asset
Pump or compressor
Asset value: Any
P1 — Pump or Compressor
Critical pump (chemical, food, pharma)
Asset value: Any
P2 — Critical Pump
CNC machining center
Asset value: Any
C1 — CNC Spindle
CNC with load monitoring
Asset value: Any
C2 — CNC with Power Monitoring
Multiple equipment types or non-standard
Asset value: Any
Custom Configuration
Custom Configuration
Equipment over €50,000?
Multiple bearing locations?
Non-standard installation?
Every motor is different. If your equipment does not fit a standard package — or if you are monitoring a large facility with multiple equipment types — we will configure the right probe layout for your specific installation.
Share your equipment details and we will respond with a recommended configuration within two business days.
- Multiple bearing locations
- Motor-gearbox assemblies
- Mixed equipment types
All packages ship as individual components.
Every component pairs with the CauseNex platform.
Add nodes to any installation at any time.